12T410 MODbus to PROFIbus PAT410The T410 is a built-in module for interfacing MODbus transmitters to a PROFIbus PA network.true0.000.0PROFI Built-in, serial./d2Y-18UlNO38pBp7t0B-hdtUZWSppxL6vToxUUW5mLtFcW89ExO74CT-tRJ6syJ1IYK.ips./T410+MODbus+to+PROFIbus+PA.9SVTFlI56n_d2Z-0ow_j1X9f3TP9D6CJ1IYL.ipslitekort3small.jpglitekort3small.jpgRiktekst på Produktrich_text

Description

T410 includes a MODbus master  in order to communicate with a MODbus instrument. The module reads the variables from the instrument and converts this to a dynamic variable on PA. Four AI Function Blocks are supported. The location of the MODbus registers and data type of the MODbus variable can be configured.  Other Function blocks can be added on request.


Applications

The T410 is intended to be integrated into MODbus instruments that shall be upgraded to interface to PROFIbus PA

 

Power options 

The following options are available for powering and galvanic isolation:

  1. The T410 comes with Galvanic isolation for instruments that are separately powered
  2. Power supply for the instrument (3.3Vdc).

 

Option 2  is only possible for low power consuming devices. The electrical interface should be CMOS.

Interface options

The following physical interfaces are supported.

  1. CMOS UART
  2. RS 232
  3. RS 485  
PA functionality supported:
  • Alarms
  • Low pass filtering
  • Unit conversion
  • Range
  • User calibration
  • Diagnostic information
Mechanical descriptionRound card - 65 mm in diamterOperation Temperature Range-40 °C - +85 °CElectrical SpecificationCurent draw 14 mA