28T411 MODbus to PROFIbus DPT411The T411 is a built-in module for interfacing MODbus transmitters to a PROFIbus DP network.true0.000.0PROFI Built-in, serial./d2Y-18UlNO38pBp7t0B-hdtUZWSppxL6vToxUUW5mLtFcW89ExO74CT-tRJ6syJ1K49.ips./T411+MODbus+to+PROFIbus+DP.9SVTFlI56n_d2Z-0ow_j1X9f3TP9D6CJ1K4-.ipsT004.jpgT004Riktekst på Produktrich_text

Description

T411 includes a MODbus master  in order to communicate with a MODbus instrument. The module reads the variables from the instrument and converts this to a dynamic variable on DP. Four AI Function Blocks are supported. The location of the MODbus registers and data type of the MODbus variable can be configured.  Other Function blocks can be added on request.

 

T411 supports the DP V1 protocol and PA profile 3.01


Applications

The T411 is intended to be integrated into MODbus instruments that shall be upgraded to interface to PROFIbus DP

 

Interface options

The following physical interfaces are supported.

  1. CMOS UART
  2. RS 232
  3. RS 485  
PA functionality supported:
  • Alarms
  • Low pass filtering
  • Unit conversion
  • Range
  • User calibration
  • Diagnostic information
Mechanical descriptionRound card - 65 mm in diamterOperation Temperature Range-40 °C - +85 °CElectrical SpecificationCurent draw 14 mA