Riktekst på Produktrich_text
General description
The T500 is DIN rail module for interfacing HART instruments to a PROFIbus PA network.T500 is a complete transmitter module. It allows interfacing up to 4 HART instruments.
It generates a measured variable including a status variable indicating the quality of the measurement.
T500 includes a HART master in order to communicate with a HART instrument. The module reads the variables from the instrument and converts this to a dynamic variable on PA. Four AI Function Blocks are supported. Other Function blocks can be added on request. The HART slaves are supposed to work in multidrop mode
The Primary Variable (PV) will be continuously read and updated. Any HART communication problem will be reported in the PA Diagnostics message.
The HART Universal command parameters are available from the PA side
Applications
The T500 is intended for integration of existing HART instruments into PROFIbus PA network. It is intended for system integrators
that are building PROFIbus based systems.
PA functionality supported:
- Alarms
- Low pass filtering
- Unit conversion
- Range
- User calibration
- Diagnostic information
No special programming is required to set up the device.
Datasheet
Riktekst på Produktrich_text
General description
The T510 is DIN rail module for interfacing MODbus instruments to a PA network.T510 is a complete transmitter module. It allows interfacing up to 4 MODbus instruments.
It generates a measured variable including a status variable indicating the quality of the measurement.
T510 includes a MODbus master in order to communicate with a MODbus instrument. The module reads the variables from the instrument and converts this to a dynamic variable on FF. Four AI Function Blocks are supported. The location of the MODbus registers and data type of the MODbus variable can be configured.
The Primary Variable (PV) will be continuously read and updated. Any MODbus communication problem will be reported in the PROFIbus Diagnostics message.
Applications
The T510 is intended for integration of existing MODbus instruments into PROFIbus PA network. It is intended for system integrators
that are building Fieldbus Foundation based systems.The physical interfaces is
RS 485
PA functionality supported:
- Alarms
- Low pass filtering
- Unit conversion
- Range
- User calibration
- Diagnostic information
Riktekst på Produktrich_text
General description
The T511 is DIN rail module for interfacing MODbus instruments to a DP network.T511 is a complete transmitter module. It allows interfacing up to 4 MODbus instruments.
It generates a measured variable including a status variable indicating the quality of the measurement.
T511 supports the DP V1 functionality and the PA Profile 3.1
T511 includes a MODbus master in order to communicate with a MODbus instrument. The module reads the variables from the instrument and converts this to a dynamic variable on FF. Four AI Function Blocks are supported. The location of the MODbus registers and data type of the MODbus variable can be configured.
The Primary Variable (PV) will be continuously read and updated. Any MODbus communication problem will be reported in the PROFIbus Diagnostics message.
Applications
The T511 is intended for integration of existing MODbus instruments into PROFIbus DP network. It is intended for system integrators
that are building Fieldbus Foundation based systems.The physical interfaces to the MODbus instruments is
RS 485
PA functionality supported:
- Alarms
- Low pass filtering
- Unit conversion
- Range
- User calibration
- Diagnostic information
Riktekst på Produktrich_text
General description
The T501 is DIN rail module for interfacing HART instruments to a PROFIbus DP network.T501 is a complete transmitter module. It allows interfacing up to 4 HART instruments.
It generates a measured variable including a status variable indicating the quality of the measurement.
T501 supports the DP V1 protocol and PA Profile 3.01
T501 includes a HART master in order to communicate with a HART instrument. The module reads the variables from the instrument and converts this to a dynamic variable on DP. Four AI Function Blocks are supported. Other Function blocks can be added on request. The HART slaves are supposed to work in multidrop mode
The Primary Variable (PV) will be continuously read and updated. Any HART communication problem will be reported in the PROFIbus Diagnostics message.
The HART Universal command parameters are available from the DP side
Applications
The T501 is intended for integration of existing HART instruments into PROFIbus DP network. It is intended for system integrators
that are building PROFIbus based systems.
PA functionality supported:
- Alarms
- Low pass filtering
- Unit conversion
- Range
- User calibration
- Diagnostic information
No special programming is required to set up the device.
Datasheet
